The vacuum oil purifier can purify various oil impurities, so it is also known as a high-efficiency vacuum oil purifier. Using it can help improve the quality of the oil, and at the same time, it has a protective effect on the oil replenishment of the oil tank, ensuring safety issues and protecting oil products. . A reusable vacuum oil filter is used too many times, and some equipment failures are inevitable. The failure problems of vacuum oil purifiers are nothing more than the following categories, and the solutions are given here, which will help customers to deal with them in time in the future.
1. The vacuum degree of the oil filter is not up to standard.
Reasons: air leakage at the connection, wear of the vacuum pump; too much moisture in the oil; high atmospheric pressure; too low oil level line of the vacuum pump, etc.
Solution: Repair and replace wearing parts; filter oil frequently, evaporate oil moisture; increase vacuum pump; replenish oil, etc.
2. The oil volume of the oil discharge pump is insufficient and the air pressure is not enough.
Reasons: The oil seal of the oil pump is leaking; the filter screen of the primary filter is blocked, the injection holes in the vacuum cylinder are blocked, etc.
Solution: If the oil seal is not replaced, adjust the oil seal gland; clean the corresponding oil filter parts, etc.
